Blog Archives

Cisco Jabber for Windows on CallManager Express

-+*Components Used The information in this document is based on these software and hardware versions: Integrated Services Router Generation 2 (ISR G2) router that runs Cisco IOS® version 15.3(3)M or later A PC with an operating system compatible with Jabber

Posted in CCIE Wireless

How to Use aIOS WGB with EAP-TLS Authentication in a Cisco Unified Wireless Network

-+*This example shows how to configure and use an autonomous IOS (aIOS) AP, running in Workgroup Bridge (WGB) mode, with EAP-TLS authentication, in a Cisco Unified Wireless Network (CUWN). In this example, a Microsoft Certification Authority (Windows 2003) issued the

Posted in CCIE Wireless

EAP-TLS under Unified Wireless Network with ACS 4.0 and Windows 2003

-+*Introduction This document describes how to configure secure wireless access using Wireless LAN Controllers (WLCs), Microsoft Windows 2003 software and Cisco Secure Access Control Server (ACS) 4.0 via Extensible Authentication Protocol-Transport Layer Security (EAP-TLS). Note: For more information about the deployment

Posted in CCIE Wireless

AAA Override with ACS5.2

-+*In this post we will see how to use “AAA override” feature of a WLAN combined with RADIUS server configuration,  to override settings assigned by WLAN. You can change VLAN, QoS profile with 802.1p, ACL, etc using this this. We

Posted in CCIE Wireless

WMM & QoS Profile

-+*In this post we will see the impact of enabling or disabling WMM (Wireless Multi Media) to QoS of wireless traffic in a given WLAN. WMM setting is based on IEEE 802.11e standard to provide QoS to wireless network. An

Posted in CCIE Wireless

Configuring AP Groups

-+*By creating AP Groups you can control  What SSIDs advertise on which APs, What dynamic interface map to each AP group (to reduce the broadcast size while having the same SSID). In latest codes of WLC software, via AP Group

Posted in CCIE Wireless

Configuring Local EAP on WLC

-+*Local EAP is an authentication method that allows users and wireless clients to be authenticated locally to WLC. This is useful for a remote branch where it does not have a external RADIUS on-site or do not want to rely

Posted in CCIE Wireless

Configuring EAP-TLS on WLC

-+*In this post we will see how to configure EAP-TLS on a wireless controller.It is assumed that you have a PC which has already installed certificates(User Certifcate & Root CA Certificate). You can learn how to do this by following

Posted in CCIE Wireless

WGB with CAPWAP

-+*Since WGB AP acting as client, it can be associated to any (Autonomous or Lightweight) other AP. In this post we will see how WGB associated with a CAPWAP AP. Here is the setup for this post (Note that CAPWAP

Posted in CCIE Wireless

WLC – Web Authentication

-+*Web Authentication or Web Auth is a layer 3 security method that allow client to pass DHCP  & DNS traffic only untill they have passed some form of authentication. This is greatly used in wireless guest access service where no

Posted in CCIE Wireless