Blog Archives

How to record prompt using Cisco Unity Express

-+*Step 1: Configure a Dial-peer in your CME to service the call-in number. dial-peer voice 1000 voip destination-pattern 4210  —- Call-in Number session protocol sipv2 session target ipv4:192.168.20.2 dtmf-relay rtp-nte codec g711ulaw no vad Step 2: Login to CUE http://192.168.20.2,

Posted in CCIE Collaboration

Visual Voicemail

-+*Creating a Voicemail Pilot Number for Visual Voicemail Step 1 Select Voicemail–>Voicemail Pilot in Cisco Unified Communications Manager Administration Step 2 Select Add New Step 3 Enter a directory number for the voicemail pilot for visual voicemail in the voicemail

Posted in CCIE Collaboration

How to remove myphoneapp & extension mobility from Skinny and Sip Phones

-+*Skinny Phones ———————- ephone 1 exclude myphoneapp exclude em telephony-services create cnf Sip Phones —————- voice register pool 1 exclude myphoneapp exclude em vice register global no create profile reset create profile

Posted in CCIE Collaboration

CME 9.1 Shared line between SIP and SCCP Phone

-+*voice register pool  1 id mac aaaa.bbbb.cccc number 1 dn 6 ! voice register dn  6 number 852 allow watch name Joaquim shared-line max-calls 16 label Joaquim ! ephone-dn  6  octo-line number 852 label Arshad name Arshad shared-line sip !

Posted in CCIE Collaboration

Extension Mobility – How to Cut Out the Login Step

-+*Cisco Extension Mobility feature allows users to temporarily access their Cisco IP Phone configurations such as lines, services, and speed dials from other Cisco IP Phones. With Extension Mobility configured any user can log in to Cisco IP phone to

Posted in CCIE Collaboration

Disabling PC Port and Settings button on an IP phone for Communications Manager Express

-+*For security reasons you may wish to disable the PC port on an IP phone and the Settings button. A good example of this would be a lobby phone where we don’t want the visitors to be able to discover

Posted in CCIE Collaboration

Configuring an Inbound Dial Peer to Match on URI

-+*SUMMARY STEPS 1.    enable 2.    configure terminal 3.    voice class uri voice-class-uri-tag 4.    Specify a URI field for the voice class: host hostname-pattern host ipv4: ipv4-address host ipv6: ipv6-address host dns: dns-address pattern uri-pattern user-id username-pattern 5.    exit 6.    dial-peer

Posted in CCIE Collaboration

Modify the vendorConfig parameters in SCCP Phones

-+*The following example shows how to configure multiple service phone parameters. This configuration is applied only in as much as IP phone firmware supports each parameter. Router(config)# telephony-service Router(config-telephony)# service phone disableSpeaker true Router(config-telephony)# service phone disableSpeakerAndHeadset true Router(config-telephony)# service

Posted in CCIE Collaboration

CISCO SIP PHONES ADMIN PASSWORD REMOVAL CME (TCLSH OPERATION)

-+*On this one I wanted to share a really nice way to remove the Admin password from Cisco SIP phones. It really is annoying to type the Admin password every time you need to modify or at least take a

Posted in CCIE Collaboration

Scenario#45: 7841 SIP phone in Registration loop

-+*I was working on this customer issue last week where they added a new 7841 phone but it was not registering properly or should I say it was registering briefly before unregistering. Call Manager was 9.1.2.11900-12 which does not support

Posted in CCIE Collaboration